Kryotherm Products
Click the logo to return to the homepage
	Kryotherm's product offerings can be split into two broad groups - Thermo Electric Coolers, and Thermo Generating Modules.
	Thermo Generating Modules
	Thermo Generating Modules (TGMs) are based on the principle behind any thermoelectric generator - the Seebeck effect. This was discovered in 1821 and reads as follows:
Click here for more information on TGMs
	"Whenever there is a temperature difference between the two points of the open circuit that is made up of two heterogeneous semiconductors, thermo electromotive force is produced which is in direct proportion to the temperature gradient between the two points."
	Thermo Electric Coolers
	The basic concept behind Thermo Electric Coolers (TECs) is the peltier effect which occurs whenever current passes through the circuit of 2 dissimilar semiconductors; depending on the current direction, the junction of the two conductors will either absorb or release heat in direct proportion to the current supplied.
TEC Product Links	Thermoelectric cooling devices and systems are considered to be as good as compressor or absorber based refrigerators. However, thermoelectric cooling offers a number of advantages over traditional refrigeration methods, such as:
Preliminary Remarks
Miniature Single Stage TECs	-Solid state heat pumps have no moving parts and do not require the use of liquids, gases, or refrigerants.
Standard Single Stage TECs	-High reliability - Kryotherm guarantees mean time between failure (MTBF) of 200,000 hours.
Highly Effective Single Stage TECs	-Precise temperature control.
Special TECs	-Relatively low cost and high effectiveness.
TECs With Holes	-Operation in any orientation.
Multistage TECs	-Noiseless operation.
Standard Supply Options	-Compact size and light weight makes TECs well suited for miniature coolers.
© Steadlands International Marketing Limited 2009. All Rights Reserved.