Click here for a datasheet on the ACE-TEK range
Read magnetic stripe cards conform to ISO7811
Manual swipe, bi-directional with TTL output
Available in single, dual or triple track configuration
Read high & low coercivity magnetic strips (300~4000 Oe)
5~55ips operational swipe speed
5VDC 10% operational power
CE, FCC, UL, cUL certified
Click here for a MSR110 Datasheet
Compact size - can be mounted on keyboard or any flat surface
Software and hardware modification not required
Single, dual and triple track decoding
Bi-directional card swipe and read capability
LED indications: LED Off: swiping card & sending card data; Green: stand-by.
Data rate: 9600 baud rate, none parity, 8-bit, 1 stop bit
No extra power supply is needed.
Powered from RS232 port
Limited programmable track data output
Read magnetic stripe cards conform to ISO 7811, AAMVA
Manual swipe, bi-directional
Read high and low coercivity magnetic stripes (300~4000 Oe)
LED and beeper for read status
Click here for a MSR120D Manual
Read and convert magnetic stripe data RS232 format to USB format
Firmware downloadable
Read magnetic stripe cards conform to ISO 7811, AAMVA and custom data format
Manual swipe, bi-directional with USB interface
Read high and low coercivity magnetic stripes (300~4000 Oe)
LED and beeper for reading status
Programmable track data output and on screen configuration set up
Downloadable firmware
Multi-language capability
Read magnetic stripe cards conform to ISO 7811, AAMVA
Manual swipe, bi-directional
Read high and low coercivity magnetic stripes (300~4000 Oe)
LED and beeper for read status
Programmable track data output in screen comfiguration set up
Firmware downloadable
Read and emulate keyboard data format to USB format
Mulit-language support
Read magnetic stripe cards conform to ISO 7811, AAMVA
Manual swipe, bi-directional
Read high and low coercivity magnetic stripes (300~4000 Oe)
LED and beeper for reading status
Compatible with HID specification Version 1.1
Compatible with USB specification Version 1.1
Click here for a MSR213U Manual
Read magnetic stripe cards conform to ISO 7811, AAMVA
Read high and low concercivity magnetic stripes (300 ~ 4000 Oe)
Can be configured as USB HID or USB keyboard emulation
USB HID or USB keyboard emulation interface; no third party device driver is required
Firmware downloadable
Mulit-language support
Manual swipe, bi-directional
LED and beeper for reading status
Low power consumption
Reliable for over 1,000,000 card swipes
15 kv ESD protected
Read Tickets/Boarding Rasses confrom to IATA ATB3 722c format
Designed for boarding gata check & cards acceptance
Read magnetic stripe card comform to ISO 7811 or DMV format
Manual swipe, Bi-directional read with keyboard simulated output
Read high & low coercive force magnetic stripe (300~4000 Oe)
Programmable output data format bu keyboard programming
Audible beeper and LED to indicate card read status
Single, dual, or triple track versions allow to reading ISO7810/7811, AAMVA and DMV cards.
Raw data output
Provide a DLL package for decoding the raw data to appropriate format for the AP at terminal/host.
Compact size without bottom cover and it can be mounted on keyboard or and flat surface
Power supplied from USB port of host system.
LED indications: LED Off: Transmittion data; Green: stand-by/good read;
Optional LED to indicate the status of reader
Read/write magnetic stripe cards conform to ISO 7811
Read/write magnetic stripe passbook conform to ISO 8484
Manual swipe read/write with RS-232 interface
Read high or low coercicity magnetic stripes (300-4000 Oe)
Write low coercivity magnetic stripes (300-600 Oe)
Write and verify data simultaneously in one swipe single, dual or triple tracks
Full featured WIN95/98/2000 utility Domo program
Programmable data format
CE, FCC, UL. cUL certified
Read/write magnetic stripe cards conform to ISO 7811/1-6
Read/write high & low coer cavity magnetic stripes (300-4000 Oe)
Write and verify data simultaneously in one swipe single, dual or triple tracks
Manual swipe read/write with RS-232 interface
Write high or high & low coercivity magnetic stripes
Full featured WIN95/98/2000 utility Domo program
Programmable data format
CE, FCC, UL. cUL certified
Fully compliant with IBM 4777 series
Provides a full range of magnetic stripe capabilities.
Attaches to either a mouse or serial port.
Requires no external power supply.
Offers card-read capability for the rapid initiation of transactions.
In conjunction with the UIC MSR778 PIN Pad, provides the capability to create a new card at the opening of a new account.
USB 2.0
EMV2000 level 1 compliant
PC/SC compliant, Proprietary API, CT-API
Friction type with over 200,000 insertion cycles
Supports Windows Plug & Play function
Microsoft WHQL Certifications ,Windows Me/2000/XP